package tcpip
Install
Dune Dependency
Authors
Maintainers
Sources
sha256=6e32bf540d291e9b7325cb3dd00df2f695533e009c46ea534d5518b9492c7348
sha512=2e9f9ca2eeac637599eb48e087b4632598539f1c76f9251758995c7eedeb723f8b951d557a2a53b85a58d50a04e68e15598581f88fca8997733e800fcfca422b
doc/tcpip.stack-direct/Tcpip_stack_direct/MakeV4V6/index.html
Module Tcpip_stack_direct.MakeV4V6
Source
Parameters
module Time : Mirage_time.S
module Random : Mirage_random.S
module Netif : Mirage_net.S
module Ethernet : Mirage_protocols.ETHERNET
module Arpv4 : Mirage_protocols.ARP
module Ip : Mirage_protocols.IP with type ipaddr = Ipaddr.t
module Icmpv4 : Mirage_protocols.ICMP with type ipaddr = Ipaddr.V4.t
module Udp : UDPV4V6_DIRECT
module Tcp : TCPV4V6_DIRECT
Signature
include Mirage_stack.V4V6
with module IP = Ip
and module TCP = Tcp
and module UDP = Udp
The type representing the internal state of the dual IPv4 and IPv6 stack.
Disconnect from the dual IPv4 and IPv6 stack. While this might take some time to complete, it can never result in an error.
module UDP = Udp
module TCP = Tcp
module IP = Ip
udp t
obtains a descriptor for use with the UDP
module, usually to transmit traffic.
tcp t
obtains a descriptor for use with the TCP
module, usually to initiate outgoing connections.
ip t
obtains a descriptor for use with the IP
module, which can handle raw IPv4 and IPv6 frames, or manipulate IP address configuration on the stack interface.
listen_udp t ~port cb
registers the cb
callback on the UDP port
and immediately return. If port
is invalid (not between 0 and 65535 inclusive), it raises Invalid_argument
. Multiple bindings to the same port will overwrite previous bindings, so callbacks will not chain if ports clash.
val listen_tcp :
?keepalive:Mirage_protocols.Keepalive.t ->
t ->
port:int ->
(TCP.flow -> unit Lwt.t) ->
unit
listen_tcp ~keepalive t ~port cb
registers the cb
callback on the TCP port
and immediately return. If port
is invalid (not between 0 and 65535 inclusive), it raises Invalid_argument
. Multiple bindings to the same port will overwrite previous bindings, so callbacks will not chain if ports clash. If ~keepalive
is provided then these keepalive settings will be applied to the accepted connections before the callback is called.
val connect :
Netif.t ->
Ethernet.t ->
Arpv4.t ->
Ip.t ->
Icmpv4.t ->
Udp.t ->
Tcp.t ->
t Lwt.t
connect
assembles the arguments into a network stack, then calls `listen` on the assembled stack before returning it to the caller. The initial `listen` functions to ensure that the lower-level layers are functioning, so that if the user wishes to establish outbound connections, they will be able to do so.