Source file serialize.ml

(*----------------------------------------------------------------------------
 *  Copyright (c) 2017 Inhabited Type LLC.
 *  Copyright (c) 2019 Antonio N. Monteiro.
 *
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *  2. Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *
 *  3. Neither the name of the author nor the names of his contributors
 *     may be used to endorse or promote products derived from this software
 *     without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND ANY EXPRESS
 *  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 *  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 *  DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
 *  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 *  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 *  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 *---------------------------------------------------------------------------*)

open Faraday
module IOVec = Httpaf.IOVec

type frame_info =
  { flags : Flags.t
  ; stream_id : Stream_identifier.t
  ; padding : Bigstringaf.t
  ; max_frame_payload : int
  }

let write_uint24 t n =
  let write_octet t o = write_uint8 t (o land 0xff) in
  write_octet t (n lsr 16);
  write_octet t (n lsr 8);
  write_octet t n

let write_frame_header t frame_header =
  let { Frame.payload_length; flags; stream_id; frame_type } = frame_header in
  write_uint24 t payload_length;
  write_uint8 t (Frame.FrameType.serialize frame_type);
  write_uint8 t flags;
  BE.write_uint32 t stream_id

let write_frame_with_padding t info frame_type length writer =
  let header, writer =
    if Bigstringaf.length info.padding = 0 then
      let header =
        { Frame.payload_length = length
        ; flags = info.flags
        ; stream_id = info.stream_id
        ; frame_type
        }
      in
      header, writer
    else
      let pad_length = Bigstringaf.length info.padding in
      let writer' t =
        write_uint8 t pad_length;
        writer t;
        schedule_bigstring ~off:0 ~len:pad_length t info.padding
      in
      let header =
        { Frame.payload_length = length + pad_length + 1
        ; flags = Flags.set_padded info.flags
        ; stream_id = info.stream_id
        ; frame_type
        }
      in
      header, writer'
  in
  write_frame_header t header;
  writer t

let write_data_frame t ?off ?len info body =
  let writer t = write_string t ?off ?len body in
  let length = match len with Some len -> len | None -> String.length body in
  write_frame_with_padding t info Data length writer

let schedule_data_frame t info ?off ?len bstr =
  let writer t = schedule_bigstring t ?off ?len bstr in
  let length =
    match len with Some len -> len | None -> Bigstringaf.length bstr
  in
  write_frame_with_padding t info Data length writer

let write_priority t { Priority.exclusive; stream_dependency; weight } =
  let stream_dependency_id =
    if exclusive then
      Priority.set_exclusive stream_dependency
    else
      stream_dependency
  in
  BE.write_uint32 t stream_dependency_id;
  (* From RFC7540§6.3:
   *   An unsigned 8-bit integer representing a priority weight for the stream
   *   (see Section 5.3). Add one to the value to obtain a weight between 1 and
   *   256.
   *
   * Note: we store priority with values from 1 to 256, so decrement here. *)
  write_uint8 t (weight - 1)

let bounded_schedule_iovecs t ~len iovecs =
  let rec loop t remaining iovecs =
    match remaining, iovecs with
    | 0, _ | _, [] ->
      ()
    | remaining, { IOVec.buffer; off; len } :: xs ->
      if remaining < len then
        schedule_bigstring t ~off ~len:remaining buffer
      else (
        schedule_bigstring t ~off ~len buffer;
        loop t (remaining - len) xs)
  in
  loop t len iovecs

let write_headers_frame t info ~priority ?len iovecs =
  let len = match len with Some len -> len | None -> IOVec.lengthv iovecs in
  if priority == Priority.default_priority then
    (* See RFC7540§6.3:
     *   Just the Header Block Fragment length if no priority. *)
    let writer t = bounded_schedule_iovecs t ~len iovecs in
    write_frame_with_padding t info Headers len writer
  else
    (* See RFC7540§6.2:
     *   Exclusive Bit & Stream Dependency (4 octets) + Weight (1 octet) +
     *   Header Block Fragment length. *)
    let payload_length = len + 5 in
    let info' = { info with flags = Flags.set_priority info.flags } in
    let writer t =
      write_priority t priority;
      bounded_schedule_iovecs t ~len iovecs
    in
    write_frame_with_padding t info' Headers payload_length writer

let write_priority_frame t info priority =
  let header =
    { Frame.flags = info.flags
    ; stream_id =
        info.stream_id
        (* See RFC7540§6.3:
         *   Stream Dependency (4 octets) + Weight (1 octet). *)
    ; payload_length = 5
    ; frame_type = Priority
    }
  in
  write_frame_header t header;
  write_priority t priority

let write_rst_stream_frame t info e =
  let header =
    { Frame.flags = info.flags
    ; stream_id =
        info.stream_id
        (* From RFC7540§6.4:
         *   The RST_STREAM frame contains a single unsigned, 32-bit integer
         *   identifying the error code (Section 7). *)
    ; payload_length = 4
    ; frame_type = RSTStream
    }
  in
  write_frame_header t header;
  BE.write_uint32 t (Error_code.serialize e)

let rec write_settings_payload t = function
  | [] ->
    ()
  | (key, value) :: xs ->
    (* From RFC7540§6.5.1:
     *   The payload of a SETTINGS frame consists of zero or more parameters,
     *   each consisting of an unsigned 16-bit setting identifier and an
     *   unsigned 32-bit value. *)
    BE.write_uint16 t (Settings.serialize_key key);
    BE.write_uint32 t (Int32.of_int value);
    write_settings_payload t xs

let write_settings_frame t info settings =
  let header =
    { Frame.flags = info.flags
    ; stream_id =
        info.stream_id
        (* From RFC7540§6.5.1:
         *   The payload of a SETTINGS frame consists of zero or more
         *   parameters, each consisting of an unsigned 16-bit setting
         *   identifier and an unsigned 32-bit value. *)
    ; payload_length = List.length settings * 6
    ; frame_type = Settings
    }
  in
  write_frame_header t header;
  write_settings_payload t settings

let write_push_promise_frame t info ~promised_id ?len iovecs =
  let len = match len with Some len -> len | None -> IOVec.lengthv iovecs in
  let payload_length =
    (* From RFC7540§6.6:
     *   The PUSH_PROMISE frame includes the unsigned 31-bit identifier of the
     *   stream the endpoint plans to create along with a set of headers that
     *   provide additional context for the stream. *)
    4 + len
  in
  let writer t =
    BE.write_uint32 t promised_id;
    bounded_schedule_iovecs t ~len iovecs
  in
  write_frame_with_padding t info PushPromise payload_length writer

let default_ping_payload =
  (* From RFC7540§6.7:
   *   In addition to the frame header, PING frames MUST contain 8 octets of
   *   opaque data in the payload. *)
  let bstr = Bigstringaf.create 8 in
  for i = 0 to 7 do
    Bigstringaf.unsafe_set bstr i '\000'
  done;
  bstr

let write_ping_frame t info ?(off = 0) payload =
  (* From RFC7540§6.7:
   *   In addition to the frame header, PING frames MUST contain 8 octets of
   *   opaque data in the payload. *)
  let payload_length = 8 in
  let header =
    { Frame.flags = info.flags
    ; stream_id = info.stream_id
    ; payload_length
    ; frame_type = Ping
    }
  in
  write_frame_header t header;
  schedule_bigstring ~off ~len:payload_length t payload

let write_go_away_frame t info stream_id error_code debug_data =
  let debug_data_len = Bigstringaf.length debug_data in
  let header =
    { Frame.flags = info.flags
    ; stream_id =
        info.stream_id
        (* See RFC7540§6.8:
         *   Last-Stream-ID (4 octets) + Error Code (4 octets) + Additional
         *   Debug Data (opaque) *)
    ; payload_length = 8 + debug_data_len
    ; frame_type = GoAway
    }
  in
  write_frame_header t header;
  BE.write_uint32 t stream_id;
  BE.write_uint32 t (Error_code.serialize error_code);
  schedule_bigstring t ~off:0 ~len:debug_data_len debug_data

let write_window_update_frame t info window_size =
  let header =
    { Frame.flags = info.flags
    ; stream_id =
        info.stream_id
        (* From RFC7540§6.9:
         *   The payload of a WINDOW_UPDATE frame is one reserved bit plus an
         *   unsigned 31-bit integer indicating the number of octets that the
         *   sender can transmit in addition to the existing flow-control
         *   window. *)
    ; payload_length = 4
    ; frame_type = WindowUpdate
    }
  in
  write_frame_header t header;
  BE.write_uint32 t (Int32.of_int window_size)

let write_continuation_frame t info ?len iovecs =
  let len = match len with Some len -> len | None -> IOVec.lengthv iovecs in
  let header =
    { Frame.flags = info.flags
    ; stream_id = info.stream_id
    ; payload_length = len
    ; frame_type = Continuation
    }
  in
  write_frame_header t header;
  bounded_schedule_iovecs t ~len iovecs

let write_unknown_frame t ~code info payload =
  let payload_length = Bigstringaf.length payload in
  let header =
    { Frame.flags = info.flags
    ; stream_id = info.stream_id
    ; payload_length
    ; frame_type = Unknown code
    }
  in
  write_frame_header t header;
  schedule_bigstring t ~off:0 ~len:payload_length payload

let write_connection_preface t =
  (* From RFC7540§3.5:
   *   In HTTP/2, each endpoint is required to send a connection preface as a
   *   final confirmation of the protocol in use and to establish the initial
   *   settings for the HTTP/2 connection. [...] The client connection preface
   *   starts with a sequence of 24 octets, [...] the string
   *   PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n. *)
  write_string t Frame.connection_preface

module Writer = struct
  type t =
    { buffer : Bigstringaf.t
          (* The buffer that the encoder uses for buffered writes. Managed by
           * the control module for the encoder. *)
    ; encoder : Faraday.t
          (* The encoder that handles encoding for writes. Uses the [buffer]
           * referenced above internally. *)
    ; mutable drained_bytes : int
          (* The number of bytes that were not written due to the output stream
           * being closed before all buffered output could be written. Useful
           * for detecting error cases. *)
    ; headers_block_buffer : Bigstringaf.t
    ; mutable wakeup : Optional_thunk.t
    }

  let create buffer_size =
    let buffer = Bigstringaf.create buffer_size in
    let encoder = Faraday.of_bigstring buffer in
    { buffer
    ; encoder
    ; drained_bytes = 0
    ; headers_block_buffer = Bigstringaf.create 0x1000
    ; wakeup = Optional_thunk.none
    }

  let faraday t = t.encoder

  let make_frame_info
      ?(padding = Bigstringaf.empty)
      ?(flags = Flags.default_flags)
      ?(max_frame_size = Config.default.read_buffer_size)
      stream_id
    =
    { flags; stream_id; padding; max_frame_payload = max_frame_size }

  let write_connection_preface t settings_list =
    write_connection_preface t.encoder;
    let frame_info = make_frame_info Stream_identifier.connection in
    (* From RFC7540§3.5:
     *   This sequence MUST be followed by a SETTINGS frame (Section 6.5),
     *   which MAY be empty. *)
    write_settings_frame t.encoder frame_info settings_list

  let chunk_data_frames ?(off = 0) ~f frame_info total_length =
    let { max_frame_payload; _ } = frame_info in
    if max_frame_payload < total_length then
      let rec loop ~off remaining =
        if max_frame_payload < remaining then (
          (* Note: If we're splitting data into several frames, only the last
           * one should contain the END_STREAM flag, so unset it here if it's
           * set. *)
          let frame_info =
            { frame_info with flags = Flags.clear_end_stream frame_info.flags }
          in
          f ~off ~len:max_frame_payload frame_info;
          loop ~off:(off + max_frame_payload) (remaining - max_frame_payload))
        else
          f ~off ~len:remaining frame_info
      in
      loop ~off total_length
    else
      f ~off ~len:total_length frame_info

  let write_data t frame_info ?off ?len str =
    if not (is_closed t.encoder) then
      let total_length =
        match len with Some len -> len | None -> String.length str
      in
      chunk_data_frames
        frame_info
        ?off
        total_length
        ~f:(fun ~off ~len frame_info ->
          write_data_frame t.encoder frame_info ~off ~len str)

  let schedule_data t frame_info ?off ?len bstr =
    if not (is_closed t.encoder) then
      let total_length =
        match len with Some len -> len | None -> Bigstringaf.length bstr
      in
      chunk_data_frames
        frame_info
        ?off
        total_length
        ~f:(fun ~off ~len frame_info ->
          schedule_data_frame t.encoder frame_info ~off ~len bstr)

  (* Chunk header block fragments into HEADERS|PUSH_PROMISE + CONTINUATION
   * frames. *)
  let chunk_header_block_fragments
      t
      frame_info
      ?(has_priority = false)
      ~(write_frame :
         Faraday.t -> frame_info -> ?len:int -> Bigstringaf.t iovec list -> unit)
      faraday
    =
    let block_size = Faraday.pending_bytes faraday in
    let total_length =
      if has_priority then
        (* See RFC7540§6.2: Exclusive Bit & Stream Dependency (4 octets) +
           Weight (1 octet) + Header Block Fragment length. *)
        block_size + 5
      else
        block_size
    in
    let { max_frame_payload; _ } = frame_info in
    if max_frame_payload < total_length then (
      let headers_block_len =
        if has_priority then
          max_frame_payload - 5
        else
          max_frame_payload
      in
      ignore
        (Faraday.serialize faraday (fun iovecs ->
             write_frame t.encoder frame_info ~len:headers_block_len iovecs;
             `Ok headers_block_len));
      let rec loop remaining =
        if max_frame_payload < remaining then (
          (* Note: Don't reuse flags from frame info as CONTINUATION frames
           * only define END_HEADERS.
           *
           * From RFC7540§6.10:
           *   The CONTINUATION frame defines the following flag:
           *
           *     END_HEADERS (0x4): When set, bit 2 indicates that this frame
           *     ends a header block (Section 4.3). *)
          let frame_info = { frame_info with flags = Flags.default_flags } in
          ignore
            (Faraday.serialize faraday (fun iovecs ->
                 write_continuation_frame
                   t.encoder
                   frame_info
                   ~len:max_frame_payload
                   iovecs;
                 `Ok max_frame_payload));
          loop (remaining - max_frame_payload))
        else
          let frame_info =
            { frame_info with flags = Flags.(set_end_header default_flags) }
          in
          ignore
            (Faraday.serialize faraday (fun iovecs ->
                 write_continuation_frame
                   t.encoder
                   frame_info
                   ~len:remaining
                   iovecs;
                 `Ok remaining))
      in
      loop (block_size - headers_block_len))
    else
      let frame_info =
        { frame_info with flags = Flags.set_end_header frame_info.flags }
      in
      ignore
        (Faraday.serialize faraday (fun iovecs ->
             let len = IOVec.lengthv iovecs in
             write_frame t.encoder frame_info ~len iovecs;
             `Ok len))

  let encode_headers hpack_encoder faraday headers =
    List.iter
      (fun header -> Hpack.Encoder.encode_header hpack_encoder faraday header)
      (Headers.to_hpack_list headers)

  let write_request_like_frame t hpack_encoder ~write_frame frame_info request =
    let { Request.meth; target; scheme; headers } = request in
    let faraday = Faraday.of_bigstring t.headers_block_buffer in
    Hpack.Encoder.encode_header
      hpack_encoder
      faraday
      { Headers.name = ":method"
      ; value = Httpaf.Method.to_string meth
      ; sensitive = false
      };
    if meth <> `CONNECT then (
      (* From RFC7540§8.3:
       *   The :scheme and :path pseudo-header fields MUST be omitted. *)
      Hpack.Encoder.encode_header
        hpack_encoder
        faraday
        { Headers.name = ":path"; value = target; sensitive = false };
      Hpack.Encoder.encode_header
        hpack_encoder
        faraday
        { Headers.name = ":scheme"; value = scheme; sensitive = false });
    encode_headers hpack_encoder faraday headers;
    chunk_header_block_fragments t frame_info ~write_frame faraday

  let write_request_headers t hpack_encoder ~priority frame_info request =
    if not (is_closed t.encoder) then
      let write_frame = write_headers_frame ~priority in
      write_request_like_frame t hpack_encoder ~write_frame frame_info request

  let write_push_promise t hpack_encoder frame_info ~promised_id request =
    if not (is_closed t.encoder) then
      let write_frame = write_push_promise_frame ~promised_id in
      write_request_like_frame t hpack_encoder ~write_frame frame_info request

  let write_response_headers t hpack_encoder frame_info response =
    if not (is_closed t.encoder) then (
      let { Response.status; headers; _ } = response in
      let faraday = Faraday.of_bigstring t.headers_block_buffer in
      (* From RFC7540§8.1.2.4:
       *   For HTTP/2 responses, a single :status pseudo-header field is defined
       *   that carries the HTTP status code field (see [RFC7231], Section 6).
       *   This pseudo-header field MUST be included in all responses; otherwise,
       *   the response is malformed (Section 8.1.2.6). *)
      Hpack.Encoder.encode_header
        hpack_encoder
        faraday
        { Headers.name = ":status"
        ; value = Status.to_string status
        ; sensitive = false
        };
      encode_headers hpack_encoder faraday headers;
      chunk_header_block_fragments
        t
        frame_info
        ~write_frame:(write_headers_frame ~priority:Priority.default_priority)
        ~has_priority:false
        faraday)

  let write_response_trailers t hpack_encoder frame_info trailers =
    if not (is_closed t.encoder) then (
      let faraday = Faraday.of_bigstring t.headers_block_buffer in
      (* From RFC7540§8.1:
       *  optionally, one HEADERS frame, followed by zero or more
       *  CONTINUATION frames containing the trailer-part, if present (see
       *  [RFC7230], Section 4.1.2). *)
      encode_headers hpack_encoder faraday trailers;
      chunk_header_block_fragments
        t
        frame_info
        ~write_frame:(write_headers_frame ~priority:Priority.default_priority)
        ~has_priority:false
        faraday)

  let write_rst_stream t frame_info e =
    if not (is_closed t.encoder) then
      write_rst_stream_frame t.encoder frame_info e

  let write_window_update t frame_info n =
    if not (is_closed t.encoder) then
      write_window_update_frame t.encoder frame_info n

  let schedule_iovecs t ~len frame_info iovecs =
    if not (is_closed t.encoder) then
      let writer t ~len ~iovecs = bounded_schedule_iovecs t ~len iovecs in
      chunk_data_frames frame_info len ~f:(fun ~off ~len frame_info ->
          write_frame_with_padding
            t.encoder
            frame_info
            Data
            len
            (writer ~iovecs:(IOVec.shiftv iovecs off) ~len))

  let write_priority t frame_info priority =
    if not (is_closed t.encoder) then
      write_priority_frame t.encoder frame_info priority

  let write_settings t frame_info settings =
    if not (is_closed t.encoder) then
      write_settings_frame t.encoder frame_info settings

  let write_ping t frame_info ?off payload =
    if not (is_closed t.encoder) then
      write_ping_frame t.encoder frame_info ?off payload

  let write_go_away t frame_info ~debug_data ~last_stream_id error =
    if not (is_closed t.encoder) then
      write_go_away_frame t.encoder frame_info last_stream_id error debug_data

  let on_wakeup_writer t k =
    if Faraday.is_closed t.encoder then
      failwith "on_wakeup_writer on closed conn"
    else if Optional_thunk.is_some t.wakeup then
      failwith "on_wakeup: only one callback can be registered at a time"
    else
      t.wakeup <- Optional_thunk.some k

  let wakeup t =
    let f = t.wakeup in
    t.wakeup <- Optional_thunk.none;
    Optional_thunk.call_if_some f

  let flush t f = flush t.encoder f

  let yield t = Faraday.yield t.encoder

  let close t = Faraday.close t.encoder

  let close_and_drain t =
    Faraday.close t.encoder;
    let drained = Faraday.drain t.encoder in
    t.drained_bytes <- t.drained_bytes + drained

  let is_closed t = Faraday.is_closed t.encoder

  let drained_bytes t = t.drained_bytes

  let report_result t result =
    match result with
    | `Closed ->
      close_and_drain t
    | `Ok len ->
      shift t.encoder len

  let next t =
    match Faraday.operation t.encoder with
    | `Close ->
      `Close (drained_bytes t)
    | `Yield ->
      `Yield
    | `Writev iovecs ->
      `Write iovecs
end